Category Archives: Technical

Switching from VBar govenor mode to internal Tribunus govenor with Mikado VBar Control

If you want to use the internal Tribunus ESCs govenor and you was using VBar govenor before please follow these steps (please remove the blades first for safety reasons): choose “Gov. with recalc values” in your Tribunus ESC settings   … Continue reading

Posted in Technical | Comments Off on Switching from VBar govenor mode to internal Tribunus govenor with Mikado VBar Control

Tribunus ESC and VBar Govenor

When using Tribunus ESC and VBar govenor it is the best to use Tribunus ESC Setup wizard of VBar control to set it up, regarding to Kyle Dahl´s Video below. https://www.youtube.com/watch?v=SZfNMJFOve8 All necessary values will directly load (standard values for … Continue reading

Posted in Technical | Comments Off on Tribunus ESC and VBar Govenor

Mikado Proving Grounds Rev 2 Ep1 – Scorpion Trinunus 200 with Integration to VBC

Mikado Team Pilot Kyle Dahl just released the Mikado Proving Grounds Rev 2 Ep1. Scorpion Tribunus 14-200A (SBEC) with integration to Mikado VBar Control.

Posted in Product review, Technical | Comments Off on Mikado Proving Grounds Rev 2 Ep1 – Scorpion Trinunus 200 with Integration to VBC

Using Scorpion Modeling Mesh to increase cooling for your ESC and motor on your RC Helicopter!

Increase cooling for your ESC and motor on your RC Helicopter! Using Scorpion Modeling Mesh Most of the Helicopter maker don’t really consider the importance of cooling for your power electronics, so here is a simple solution, cut some cooling holes in … Continue reading

Posted in Favorite Sharing, Technical | Comments Off on Using Scorpion Modeling Mesh to increase cooling for your ESC and motor on your RC Helicopter!

Caution advisory : Static problem on belt drive helicopter.

Electrostatic discharge (ESD) cause by belt drive system is very common in RC heli, some will guide the static to the motor mount, some will guide it to the negative of the battery, both are bad idea, especially the first … Continue reading

Posted in Technical | Comments Off on Caution advisory : Static problem on belt drive helicopter.

No other ESC on the market allow you to do this.

This gallery contains 3 photos.

Tribunus Max Amp functions. exclusive functionality ! Tribunus 200A ESC AMP limits functions! How to use the Max Amp settings. The number entered means continues Amp and peak amp will be double of the continues amp. The Max amp limits … Continue reading

More Galleries | Comments Off on No other ESC on the market allow you to do this.

Videos and Links about Scorpion Tribunus, this might help you a lot!!

Bobby Watts show you how to set up the Tribunus 14-200A ESC and Demonstration flight by Kyle Stacy How to set up the 06-120A ESC Scorpion Tribunus 06-120A Demo flight Produce by Jan-David Schreier and Daniel Schreier ** Scorpion Tribunus 06-120A – … Continue reading

Posted in Technical | Comments Off on Videos and Links about Scorpion Tribunus, this might help you a lot!!

Scorpion Tribunus 14-200A ESC SBEC Q&A

Question: Scorpion:  Up until now, I’ve been a user of Kontronik Kosmik/Jive and Jeti Mezon ESCs.   One of the reasons I selected those units was the ability to place a fully charged 2S lipo directly in parallel with the BEC … Continue reading

Posted in Technical | Comments Off on Scorpion Tribunus 14-200A ESC SBEC Q&A

Scorpion Tribunus ESC – Jeti Telemetry

The all new Scorpion Tribunus ESC’s list of telemetry compatible systems is growing constantly, and it now supports Jeti integration! With this you can now see voltage, current, throttle percentage, power percentage, BEC voltage and temperature all on your home … Continue reading

Posted in Announcement, Technical | Comments Off on Scorpion Tribunus ESC – Jeti Telemetry

Telemetry/setup cable for the Tribunus ESCs – Vbar NEO

This gallery contains 15 photos.

The new Tribunus ESC offers complete setup, telemetry and data logging directly to the Vbar Control/Vbar NEO. We do this using a cable that connects from the telemetry port on the NEO, to the port on the ESC. Here is what you need … Continue reading

More Galleries | Comments Off on Telemetry/setup cable for the Tribunus ESCs – Vbar NEO